Best Brand PCI-E Express to Pci Adapter 16X Flexible Riser Cable PCIE 5.0 (180 Degree )GPU Extension Card

Best Brand PCI-E Express to Pci Adapter 16X Flexible Riser Cable PCIE 5.0 (180 Degree )GPU Extension Card.

1. Supports high speed PCI-E 16X card

2. Wire length 200-250-300 (customizable)

3. High Speed flexible cable is for 1U,2U chassis

4. Utilize high quality flexible cable which is extremely soft and compact

5. Easy to install it in 1U/2U case in any angle

6. Dustproof cap and golden finger protection cover design.

7. Experienced design and durable material for High frequency and low attenuation.

8. PCB-Swaddled and fixed with Bolts and nut to prevent tearing and short circuit for PCB-Cable solder points.

9. Stable PCIe Gen3 8Gbps or higher with high quality Axial Cable.

PCI-E 16X 5.0 to PCI-E 16X 5.0 180 degree extension cable: innovative solution for direct high-speed transmission

In the era of hardware performance explosion driven by PCI-E 5.0 technology, the demand for high-speed interconnection between devices is becoming increasingly urgent. The PCI-E 16X 5.0 to PCI-E 16X 5.0 180 degree extension cable, specially designed for the ultimate transmission experience, is a high-performance PCI-E 5.0 extension cable and expansion cable. With its unique direct connection design and cutting-edge technology configuration, it unlocks a new paradigm of efficient and stable high-speed data transmission for users. Especially in graphics card connection scenarios, it is the best choice for high-quality PCI-E 5.0 graphics card extension cables.

Empowering PCI-E 5.0 Core Technology

1. Disruptive bandwidth breakthrough

The PCI-E 5.0 standard, with a single channel transmission rate of 32 GT/s, can construct a bidirectional data highway of 128 GB/s with PCI-E 5.0 extension lines and PCI-E 5.0 extension lines in 16X channel mode. Compared to the previous generation standards, the bandwidth has doubled, which can significantly shorten the data processing cycle whether used for high-end graphics card data transmission or high load scenarios such as large-scale database concurrent read and write, allowing the performance of professional workstations and data centers to be fully released. As a PCI-E 5.0 graphics card extension cable, it can better assist graphics cards in maximizing performance and achieving complex tasks such as real-time rendering of 8K videos. ​

2. Intelligent error correction and signal enhancement

Relying on the Forward Error Correction (FEC) algorithm, PCI-E 5.0 embeds redundancy check information at the data transmission end, and the receiving end can automatically identify and correct transmission errors, improving data transmission accuracy to 99.999%. Combined with the new PAM-16 signal modulation technology, it effectively reduces inter symbol interference in high-frequency transmission while maintaining signal integrity, ensuring stable data transmission of PCI-E 5.0 extension lines, PCI-E 5.0 expansion lines, and PCI-E 5.0 graphics card extension lines in complex electromagnetic environments, and guaranteeing the accuracy of communication between devices. ​

3. Low latency architecture optimization

By streamlining the protocol stack hierarchy and optimizing the link management mechanism, PCI-E 5.0 reduces data transmission latency to the microsecond level. For scenarios such as real-time operation feedback in esports games and precise command response in industrial automation, the use of PCI-E 5.0 extension cables and PCI-E 5.0 expansion cables greatly improves the real-time interaction performance of the system, achieving seamless connection between operation and response. Especially in graphics card connectivity applications, the PCI-E 5.0 graphics card extension cable ensures smooth output of game graphics, bringing a more immersive gaming experience.

4. Intergenerational compatibility ecology

The backward compatibility feature of PCI-E 5.0 allows new and old devices to work together in the same system. When users upgrade their hardware using PCI-E 5.0 extension cables or PCI-E 5.0 expansion cables, they can gradually introduce PCI-E 5.0 components while retaining existing PCI-E 3.0/4.0 devices, building a hybrid hardware ecosystem that combines high performance and economy. Even when connected to a new graphics card through a PCI-E 5.0 graphics card extension cable, there is no need to worry about compatibility issues with other devices such as motherboards.

Precision research on 180 degree extension cable technology

1.Customized conductor system

Using 99.9997% ultra-high purity single crystal copper conductor, its crystal structure continuity is increased by 80% compared to ordinary oxygen free copper, and its resistivity is as low as 0.0168 Ω· mm ²/m. Through the 7 × 7 multi strand twisting process, the diameter of each conductor is precisely controlled at 0.075mm, and with optimized twisting pitch parameters, the skin effect in high-frequency signal transmission is effectively suppressed. At a speed of 32 GT/s, both PCI-E 5.0 extension cables, PCI-E 5.0 expansion cables, and PCI-E 5.0 graphics card extension cables can achieve ultra-low signal attenuation of -2.8dB/10GHz, ensuring the stability of high-speed data transmission. ​

2.Precision impedance matching insulation layer

Using polytetrafluoroethylene (PTFE) foam insulation material with a dielectric constant as low as 1.25, coupled with a uniform wall thickness design of 0.18mm ± 0.015mm. By using physical foaming technology to form a honeycomb structure, the characteristic impedance of the wire is precisely controlled at 100 Ω± 3 Ω while ensuring signal transmission stability, effectively eliminating signal reflection and crosstalk, and ensuring data integrity at a bandwidth of 128GB/s for PCI-E 5.0 extension lines, PCI-E 5.0 expansion lines, and PCI-E 5.0 graphics card extension lines. ​

3.3D shielding system

Construct a three-layer protective structure consisting of an aluminum foil inner shielding layer, silver plated copper braided mesh, and an alloy outer shielding shell:
Nano level aluminum foil layer: 0.008mm ultra-thin aluminum foil tightly adheres to the insulation layer, with a shielding efficiency of 98% against low-frequency electromagnetic interference; ​
High density woven mesh: Silver plated copper woven mesh with 95% coverage, with a shielding efficiency of 65dB in the 1GHz frequency band, effectively resisting high-frequency signal interference; ​
Magnesium aluminum alloy shell: an integrated die-casting outer shielding shell that combines electromagnetic shielding and physical protection functions, forming a complete shielding circuit through grounding design. Three layer protection ensures stable operation of PCI-E 5.0 extension cables, PCI-E 5.0 expansion cables, and PCI-E 5.0 graphics card extension cables in complex electromagnetic environments, avoiding signal interference. ​

4. Innovation in Direct Connect Connectors

The 180 degree direct connection PCI-E connector adopts LCP engineering plastic and stainless steel alloy frame, which can withstand high temperature of 280 ℃ and 50N insertion and extraction force. The terminal surface is treated with 5 μ m thick gold plating, with a contact resistance as low as 35m Ω. Coupled with a differential signal independent isolation groove design, the crosstalk suppression ratio is increased to -40dB. The connector integrates a signal pre emphasis circuit internally, which can dynamically compensate for signal attenuation during long-distance transmission. This series of innovative designs ensures that the extension cable maintains optimal signal quality when used as a PCI-E 5.0 extension cable, PCI-E 5.0 extension cable, and PCI-E 5.0 graphics card extension cable.

In depth analysis of product features

1. Lossless transmission guarantee:

Strictly following the PCI-SIG PCI-E 5.0 specification design, precise circuit topology optimization and signal conditioning technology are used to ensure that PCI-E 5.0 extension lines, PCI-E 5.0 expansion lines, and PCI-E 5.0 graphics card extension lines can maintain full bandwidth performance of 128GB/s within a transmission distance of 100cm. After professional instrument testing, the signal eye opening reaches over 85%, and the jitter value is controlled within ± 50ps, achieving the ultimate transmission experience of zero packet loss and zero delay, meeting the needs of various devices for high-speed and stable data transmission. ​

2. Industrial grade manufacturing standards:

Adopting fully automatic laser welding technology, molecular level fusion of connectors and wires is achieved, and the tensile strength of solder joints reaches 80MPa. Through 100000 bending tests and 5000 plug-in life tests, the reliability of the product is ensured in harsh usage environments. IPX4 waterproof and dustproof design, combined with a wide temperature range of -40 ℃ to 85 ℃, can run stably and reliably whether used as a PCI-E 5.0 extension cable for data center equipment connection or as a PCI-E 5.0 graphics card extension cable for graphics card installation in industrial control scenarios. ​

3.Scenario based length selection:

Provide three standardized length specifications (20cm -25cm -30cm) to meet different equipment layout requirements. Short cables are suitable for compact ITX chassis, serving as PCI-E 5.0 graphics card extension cables for flexible installation of graphics cards; Long cables can achieve high-speed cross device interconnection between server cabinets. As high-quality PCI-E 5.0 extension cables and PCI-E 5.0 expansion cables, they provide users with highly flexible wiring solutions.