Quality PCI-E Riser Cable & Raspberry Pi Adapter factory

Material advantages Lightweight and High Strength: The low density of aluminum makes the entire heat dissipation shell lightweight, easy to carry and install. At the same time, aluminum alloy has high strength, which can effectively protect the Raspberry Pi 5 motherboard and prevent damage during handling, installation, and use. Strong corrosion resistance: The aluminum shell has excellent corrosion resistance, and a strong and corrosion-resistant oxide film is easily formed on its surface. It can be used for a long time under harsh environmental conditions without being easily damaged by oxidation, corrosion, etc., which helps to maintain the stable heat dissipation performance of the shell and extend the service life of the equipment.   Heat dissipation performance： High thermal conductivity: The thermal conductivity of aluminum is about 205W/(m · K), which is a relatively high level among metal materials. This enables the aluminum heat dissipation shell to quickly transfer the heat generated by the Raspberry Pi 5 motherboard to the surface of the shell, and dissipate it to the environment through air convection or radiation, effectively reducing device temperature. Ventilation design: Multiple ventilation holes are usually designed, such as at the top, bottom, or side of the casing, which can accelerate air flow, form good convection, and dissipate heat faster. When used in conjunction with a cooling fan, the cooling effect is better. Temperature uniformity: Good thermal conductivity helps to evenly distribute heat throughout the entire shell, avoiding local overheating of the Raspberry Pi 5 motherboard and extending the service life of the motherboard and other components.  

Recently, a highly innovative PCI-E5.0 180 degree vertical height increasing adapter card was officially released, bringing a new revolution to the computer hardware field and attracting close attention from computer enthusiasts, installation experts, and professional workstation users.   At present, with the continuous improvement of computer hardware performance, the demand for high-speed data transmission is becoming increasingly urgent. PCI-E5.0, as the latest generation of high-speed interface standards, has unprecedented transmission rates. This newly released adapter card is perfectly compatible with the PCI-E5.0 standard, with significantly increased transmission bandwidth. Compared to its predecessor, it can transmit massive amounts of data at a faster speed, greatly reducing the waiting time for data processing and transmission. Whether loading large game maps in game scenes, processing high-resolution images and video materials in professional graphic design fields, or data interaction during scientific research calculations, smooth operation can be ensured, significantly improving the overall performance of the device.     Its unique 180 degree vertical design is a major highlight. In traditional computer chassis layout, graphics cards and other expansion cards are mostly installed horizontally, occupying a large amount of internal space in the chassis, which is not conducive to air circulation inside the chassis and can easily lead to poor hardware heat dissipation. And this vertical height increasing adapter card cleverly transforms the expansion card from horizontal placement to vertical installation. This change not only effectively saves the lateral space inside the chassis, making the chassis layout more compact and reasonable, but also optimizes the air duct design inside the chassis, allowing air to flow smoothly through various hardware and significantly improving the heat dissipation conditions of the hardware. For users who pursue ultimate performance and compact chassis layout, this design is undoubtedly a great blessing.     The launch of the PCI-E5.0 180 degree vertical height increasing adapter card provides a new solution for upgrading and optimizing computer hardware. Both high-performance gamers and professionals with strict requirements for data processing speed can benefit from this product.    

Recently, a POE HAT designed specifically for Raspberry Pi 5 motherboards has been officially launched, bringing a brand new user experience to Raspberry Pi enthusiasts and developers. This POE HAT aims to address the pain points of Raspberry Pi 5 in terms of network connectivity and power supply, and achieves the integration of network transmission and power supply through clever design.     Simply install POE HAT on the Raspberry Pi 5 motherboard, and users can easily use an Ethernet cable to simultaneously complete network transmission and device power supply, eliminating the hassle of complex connections between power and network cables in traditional wiring. This greatly simplifies the deployment process of Raspberry Pi, whether it is building smart devices in home environments or building IoT nodes in industrial scenarios, it can greatly improve installation and usage efficiency.     It is worth mentioning that this POE HAT motherboard is also equipped with a cooling fan. The Raspberry Pi 5 is prone to generating heat from the CPU and electronic components during high-performance computing, which can affect device performance and stability. And the cooling fan can effectively dissipate heat, providing good cooling protection for the CPU and electronic components of the Raspberry Pi 5 motherboard, ensuring long-term stable operation of the device, even under high load tasks, and maintaining smoothness.     This POE HAT motherboard has many highlights. It is equipped with RGB light beads, which can present colorful lighting effects according to different working states or user-defined settings, not only adding a sense of technology to the device, but also serving as an intuitive way of indicating status. Meanwhile, POE HAT is equipped with independent LED and fan switches. The independent LED switch facilitates users to independently control the on/off of indicator lights, meeting the needs of visual prompts in different scenarios; The independent fan switch allows users to flexibly turn on or off the cooling fan according to the actual load situation of the Raspberry Pi 5, effectively saving energy and reducing noise while ensuring the cooling effect. When performing high-performance computing on Raspberry Pi 5, the CPU and electronic components are prone to generate heat, which affects device performance and stability. And the cooling fan can effectively dissipate heat after being turned on, providing good cooling protection for the CPU and electronic components of the Raspberry Pi 5 motherboard, ensuring long-term stable operation of the device, even under high load tasks, and maintaining smoothness.     The introduction of POE HAT further expands the application boundaries of Raspberry Pi 5, providing more convenient and efficient solutions for fields such as education, scientific research, smart homes, and industrial control.

Innovation breakthrough: PCI-E 5.0 graphics card extension cable makes a stunning debut As a leader in the field of computer accessory manufacturing, ZYX has always been committed to providing high-performance and high-quality products to our customers. Recently, we are proud to announce that after unremitting efforts and research and development, the new PCI-E 5.0 graphics card extension cable has been officially launched, bringing unprecedented experience to computer hardware enthusiasts and professional users.       Excellent performance, leading the industry to new standards   This PCI-E 5.0 graphics card extension cable uses advanced technology and high-quality materials to ensure high-speed and stable data transmission. Compared to traditional extension cords, it has the following significant advantages:     1.Ultra high speed transmission:   Supports PCI-E 5.0 protocol and can provide up to [X] GB/s bandwidth, fully meeting the data transmission needs of the new generation of high-performance graphics cards, allowing the graphics card performance to be fully released. Whether running large 3D games or performing professional graphics rendering, video editing, and other work, it can be handled with ease. ​   2.Low signal loss:   The carefully designed circuit layout and shielding layer effectively reduce signal loss and interference during transmission, ensuring signal integrity and maintaining excellent performance even during long-distance transmission, avoiding phenomena such as image lag and frame drops caused by signal problems. ​ 3.Wide compatibility:   Not only compatible with the latest PCI-E 5.0 interface graphics cards, but also provides good support for PCI-E 4.0 and below graphics cards, with excellent backward compatibility to meet the diverse needs of different users. Whether it is a new installation user or a player upgrading an existing computer, it can be easily used.     Carefully designed to create the ultimate user experience.   We have also invested a lot of effort in product design:     1.Durable and sturdy:   Made of high-quality oxygen free copper wire material, it has good conductivity and flexibility. At the same time, the wire body has been specially reinforced to effectively prevent damage caused by bending, stretching, etc., extending the product's service life and providing reliable user protection. ​   2.Easy installation:   With user-friendly interface design, smooth insertion and removal, and a concise and clear installation guide, even novice computer hardware can easily complete the installation, quickly achieving vertical installation or position adjustment of graphics cards, bringing more flexibility to the internal space layout of the chassis. ​ 3.Fashionable appearance:   The black cable body paired with exquisite interfaces is simple yet elegant, perfectly integrating with various computer case styles. While improving performance, it also adds a sense of technology and fashion to the overall appearance of the computer.       Rich application scenarios to meet diverse needs PCI-E 5.0 graphics card extension cable is suitable for various scenarios:   1.Esports players:   Help create a cool chassis appearance, achieve vertical installation of graphics cards, improve the overall heat dissipation effect of the chassis, and ensure the stable performance of graphics cards during high load game operation, bringing players a smoother and more immersive gaming experience. ​ 2.Content creator:   When conducting professional graphic design, video editing, animation production, etc., they can ensure the stable operation of high-performance graphics cards, accelerate the rendering process, improve work efficiency, and enable creative inspiration to be quickly realized. ​ 3.Computer hardware enthusiasts:   Meet their needs for continuous exploration and upgrading of computer hardware, easily achieve various personalized chassis modifications and hardware combinations, and showcase unique creativity and taste.     Supported by technological strength, we continue to innovate and move forward:   ZYX has always attached great importance to technology research and innovation, with a professional R&D team that continuously invests resources in the development of new technologies and products. The launch of the PCI-E 5.0 graphics card extension cable is another powerful proof of our technical strength. We will continue to uphold the spirit of innovation, pay attention to user needs, and bring more high-quality and innovative products to the computer accessories market.   Buy now and start a brand new computer hardware experience:   This brand new PCI-E 5.0 graphics card extension cable is now officially available for sale. You can contact us through our official website to make a purchase. We offer multiple length specifications to meet the actual installation needs of different users. At the same time, we also provide our customers with comprehensive after-sales service, ensuring worry free purchases.       [ZYX] We sincerely invite users to experience this PCI-E 5.0 graphics card extension cable and feel the excellent performance and convenient experience it brings. I believe it will become the best choice for upgrading your computer hardware, bringing new vitality and possibilities to your computer use.  

Innovation breakthrough: [ ZYX Technology Co., Ltd ] launches Raspberry Pi 5 motherboard aluminum alloy shell.   In the current era of rapid technological development, the Raspberry Pi 5 motherboard has become the "darling" of many technology enthusiasts and professional developers due to its powerful performance and wide range of application scenarios. Today, ZYX Technology Co., Ltd. announced the release of its carefully developed aluminum alloy casing for the Raspberry Pi 5 motherboard, injecting new vitality into the Raspberry Pi technology system. With the in-depth application of Raspberry Pie in the Internet of Things, artificial intelligence, edge computing and other frontier fields, users have put forward higher requirements for the protection and performance optimization of the motherboard. The shortcomings of traditional plastic shells in terms of heat dissipation efficiency and physical protection are gradually becoming prominent, making it difficult to meet the stable operation requirements of Raspberry Pi in complex environments. ZYX Technology Co., Ltd. has keenly captured this market pain point and assembled a professional R&D team to embark on the research and development journey of this metal heat dissipation chassis shell.   In terms of heat dissipation performance, this metal shell can be called a "heat dissipation tool". Aluminum alloy, as a high-quality thermal conductive material, can quickly absorb and conduct the heat generated during the operation of the Raspberry Pi 5 motherboard to the surface of the casing. Combined with carefully designed large-area heat dissipation fins, the heat exchange efficiency is greatly improved. After professional testing, compared to ordinary plastic shells, this aluminum alloy shell can reduce the operating temperature of Raspberry Pi 5 motherboards by [60]%, ensuring that the motherboard can operate calmly under high load tasks, effectively avoiding performance degradation and system instability caused by overheating, and greatly extending the service life of the motherboard.   In terms of design, the aluminum alloy shell showcases ingenuity. Adopting high-precision mold manufacturing technology, it achieves perfect fit with the Raspberry Pi 5 motherboard. All interfaces and buttons are precisely reserved, and users can easily connect various external devices without disassembling the shell, making it easy to operate the various functions of Raspberry Pi. The overall design of the shell is simple and atmospheric, with smooth lines. The surface treated with anodizing not only has a superior texture, but also has excellent wear and corrosion resistance. Whether placed on a professional workbench or as part of a creative project, it can showcase a unique technological beauty.   We have always focused on innovation and breakthroughs in the field of electronic accessories, committed to providing users with products that exceed expectations. The launch of this Raspberry Pi 5 motherboard aluminum alloy shell is the result of our deep understanding of user needs. We hope to help Raspberry Pi users fully unleash their device potential, inspire more innovative ideas, and promote the expansion of Raspberry Pi applications in various fields through this product